Arrival procedures and check list

• Make sure that the drain valve is closed on the water system on under the deck next to the front door of the trailer. The red valve handle should be rotated to a position perpendicular to the pipe.
• Make sure that the valves on the kitchen and bathroom sinks are in the closed position (turn clockwise until seated).
• Open the water supply valve on the back side of the trailer, to the left of the base of the hot water heater. The red handle should be turned to a position that is parallel to the water pipe.
• Bleed the air from the water system by opening the valves on the sinks until water flows through them. This will insure that the hot water heater is filled and that the heating elements are submerged. Failure to do this can damage the hot water heater.
• Turn on the hot water heater by switching the 2-20 amp breakers located in the Master Bedroom closet to the on position.
• Open the valve on the propane tank that is located behind the trailer below the street.